null
How to Reuse Shipping Boxes: Cover Old Labels and Reseal

How to Reuse Shipping Boxes: Cover Old Labels and Reseal

Most homes collect a stack of delivery boxes by mid-November, and reusing them for holiday gifts, returns and online sales saves money and keeps cardboard out of the trash. But a reused box that still shows an old shipping label or barcode can confuse scanners and send your package to the wrong place. Knowing how to reuse shipping boxes correctly means checking the box, covering every old label and resealing it so it holds up in transit.

This guide walks through which boxes are safe to reuse, how to cover old labels and barcodes, and how to tape and label a reused box so it arrives in one piece.

Clear carton sealing packing tape rolls for resealing reused shipping boxes
36 Rolls Carton Sealing Packing Tape, 2 inch wide in clear or brown — Shop now

Is It Okay to Reuse Shipping Boxes

In general, yes. Carriers accept reused corrugated boxes as long as the box is in good condition and old markings are removed or fully covered. The box only has to do one job: protect the contents and carry one clear, current label. Before you reuse a box, check it against this list.

Reuse the box if

  • The corners and edges are firm, with no crushing or splitting.
  • The flaps still fold cleanly and close flat.
  • There are no holes, tears or punctures in the walls.
  • The cardboard is dry, with no water stains, mold or odors.
  • The box is the right size for the item, with room for a couple of inches of cushioning on every side.

Recycle the box instead if

  • It has been wet or shows soft, wavy walls.
  • It has been reused several times and the corners are rounded and soft.
  • It carries hazardous material markings you cannot fully remove or cover.
  • It is a carrier-branded box made for a specific service, which is usually meant only for that service.

How to Reuse Shipping Boxes Step by Step

  1. Empty and inspect. Remove old packing material, receipts and inserts. Press on each corner and wall to check strength.
  2. Remove old tape where you can. Peel off loose strips of old tape. Layers of old tape weaken the new seal because fresh tape sticks to old tape rather than to the cardboard.
  3. Cover every old label and barcode. This is the most important step. Cover old shipping labels, barcodes, QR codes and tracking stickers completely so no part can be scanned. A blank half sheet label works well because it covers a large area in one piece.
  4. Cross out or cover old addresses. Any printed or handwritten address that is not covered can cause misrouting. Cover it or black it out fully with a thick marker.
  5. Cover or remove hazmat and lithium battery markings if the new contents do not contain those items.
  6. Pack and cushion. Fill empty space so items cannot shift. Crumpled paper, bubble wrap or air pillows all work.
  7. Seal with fresh tape. Use the H-tape method on the top and bottom: one strip along the center seam and one across each edge seam.
  8. Apply one new label. Place the new shipping label on the largest flat side, away from seams and edges, and make sure it is the only label on the box.
Half sheet 8.5 x 5.5 shipping labels for covering old labels on reused boxes
Premium 8.5 x 5.5 Round Corner Half Sheet Shipping Labels — Shop now

Best Ways to Cover Old Shipping Labels

Old labels are designed to stick permanently, so peeling them off usually tears the outer layer of the box. Covering them is faster and cleaner.

Blank half sheet labels

The Premium 8.5 x 5.5 Round Corner Shipping Labels are self-adhesive half sheet labels with round corners. Placed blank, one label covers most standard shipping labels completely. You can also print your new shipping label directly onto one and place it right over the old label, covering it and labeling the box in a single step. They come in packs from 200 labels up to 4,000 labels.

Packing tape over a marked-out label

If a label is small, black out every barcode with a thick permanent marker, then cover it with packing tape so the marker does not rub off. Marker alone is not always enough, because some scanners can still read faint lines.

Plain paper and tape

In a pinch, tape a piece of plain paper over the old label, sealing all four edges so it cannot lift in transit. Make sure the paper fully covers the barcode.

Choosing Tape for Reused Boxes

Reused cardboard can be slightly dusty or worn, so tape quality matters. The 36 Rolls Carton Sealing Packing Tape is 2 inches wide, 2.2 mil thick, and comes in clear or brown on 110 yard or 65 yard rolls. A few tips help it grip:

  • Wipe dusty flaps with a dry cloth before taping.
  • Tape onto bare cardboard, not over old tape, whenever you can.
  • Extend each strip a few inches down the sides of the box for a stronger hold.
  • Rub the tape firmly after applying it so the pressure sensitive adhesive bonds to the box.
  • Avoid running tape across the barcode on your new label, since glare from shiny tape can make it harder to scan.

Safety and Weight Notes

A reused box is weaker than a new one, so keep heavy items in sturdy boxes and do not overfill. Lift with your legs, not your back, and use a dolly or hand truck for heavy cartons. If a box bulges or the bottom flexes when you lift it, repack into a stronger box.

Frequently Asked Questions

Do I have to remove old shipping labels before reusing a box?

You do not have to peel them off, but you must cover them completely. Every old barcode, tracking number and address should be hidden so only the new label can be scanned.

Can I print my new label on top of the old one?

Yes. Printing your new label on a half sheet label and placing it directly over the old label covers it and adds the new label in one step. Check that no part of the old barcode shows around the edges.

How many times can I reuse a shipping box?

It depends on condition, not a set number. If the corners are firm, the flaps close flat and the box is dry and undamaged, it can be reused. Once it feels soft or shows crushing, recycle it.

Can I reuse a box with a retailer logo on it?

Usually yes, as long as all old labels and barcodes are covered. If you are sending a gift and want to keep the contents private, consider covering logos or turning the box inside out and re-taping the seams.

Stock Up Before Holiday Shipping Season

Reusing boxes is easy with the right supplies on hand. Keep a few rolls of carton sealing packing tape and a pack of half sheet shipping labels near your packing area, and browse all shipping supplies to get ready for the busy season.

Nov 07, 2026

Recent Posts