Material: Black powder coated steel frame & rollers
Whole Dimension: 4.88 x 1.97 x 2.6 inch / 12.4 x 5 x 6.6 cm (L x W x H)
Thickness of the Metal: 0.2 inch / 0.5 cm
Each Roller Diameter: 0.79 inch / 2 cm
Max. Door Thickness: 2.05" / 5.2 cm
The distance between wall and door should be at least 1.61" / 4.1cm. If it is less than that, you can remove one roller to use it as a one-roller guide.
The distance between door bottom and floor should be at least 0.35" / 0.9cm.
1. Make sure the clearance from your door bottom to floor is greater than 0.35"/0.9cm.
2. Put the floor guide under the door, door between the 2 rollers.
3. Measure the safety distance and mount the floor guide onto wall using the provided screws.
4. Adjust the rollers to make sure enough space is left for the door to slide inside. Tighten the adjustment nut and you are ready to glide!
1 x Floor Guide
2 x M6*40 Screws
2 x White Ribbed Plastic Anchors